| Subminiature-D
 |
Hi/MateD high voltage lead assemblies convert the No. 8 gauge
insert cavities of a Subminiature-D connector to a high voltage
line rated at 13.5 KVDC.
|
- Each Hi/MateD lead assembly is tested @16 KVDC at a simulated altitude of 70,000 feet. When mated, each assembly is rated @ 13.5 KVDC over a temperature range of -55°C to +125°C at altitudes up to 70,000 feet.
- Complete cable assemblies with Hi/MateD , fiber optic and signal lines installed into Subminiature-D connectors, are available from Reynolds Industries as fully tested units.
- Hi/MateD requires no potting or adhesives and is easily removed and replaced.
- Hi/MateD operates in electrical isolation from other lines in a Subminiature-D connector. This provides compatibility between Hi/MateD and signal or fiber optic lines.
|
| A No. 8 gauge cavity in the insert arrangements shown below, can be converted to a 13.5 KVDC high voltage circuit simply by installing a Sub-D Hi/MateD lead assembly into the appropriate male or female cavity. |
 |
Note:
- Shell drawings are not to scale
- Care must be taken to observe Male/Female gender of both the Hi/MateD lead assembly and the Sub-D Shell/Insert arrangement
|
Subminiature-D
Insert Arrangements
Face view of Male
Rear view of Female
|
 No. 8 Gauge Insert Cavity
for Hi/MateD installation
 Size 20 fixed contacts
|
|
| Next |
|
