Teledyne Reynolds Ltd A Teledyne Technologies Company   

Home    Company Information    Products & Services    Teledyne Companies


Products
Hi Voltage Products
Connector & Cable
Applications
Single Pin
Multiple Pin
Advanced Group
Hi/Mate Sub-D
Hi/Mate Contact
Electronics
Electro-Ceramics
Microwave Products

Company Information
About Us
Locations
Terms and Conditions
ISO Certificates
Multimedia Library

Contact Us
Departments Directory
Contact Us

(requires Adobe Acrobat) Download this section in PDF format

Introduction
JR is a series of micro-miniature high voltage cable assemblies. The series consists of 4 pin and 6 pin cable assemblies rated at 6 KVDC designed to operate at 70,000 feet altitude over a temperature range of -55 to +125°C.
The series was originally intended to interconnect low power mini-TWTs to a power supply in a Radar or ECM System. Since their introduction, these high contact density assemblies have found applications in laser systems, photo-multiplier detection systems, night vision systems and other applications where small size and a flexible cable harness is a requirement.
JR is available only as plug or receptacle cable assemblies. Each assembly is wired with our Ready-to-Bond etched FEP or silicone rubber coated cable. A braided shield or NOMEX woven jacket is optional.
JR uses the Advanced interface sealing system. The insulator body is a thermoplastic plastic on both the plug and receptacle. The receptacle and plug bodies are nickel plated aluminum.
The completed cable assemblies are 100% high potential tested at 70,000 feet simulated altitude at room ambient temperature.
Excellent bond joints can be achieved in silicone encapsulation procedures when the Ready-to-Bond, silicone coated FEP cable is used. The Etched Ready-to-Bond FEP cable will yield good results when encapsulated into most epoxies and other rigid or semi-rigid potting materials.

General Specifications
Receptacle and Plug Bodies
Aluminum, nickel plated

Receptacle Interface Seal
Molded silicone rubber

Receptacle and Plug Insulators
Thermoplastic (unless otherwise noted)

Receptacle Contact
Type: Male
Design: Spherical radius
Material: Brass, gold plated
Size: 24 (.020 Dia.)

Plug Contact
Type: Female
Design: Split finger, closed entry
Material: BeCu, gold plate
Size: 24 (.020 Dia.)

Cable Assemblies
Back end of connector is encapsulated with silicone rubber

Electrical
Rated Voltage: 6 KVDC @ 70,000 feet
Test voltage (mated): 150% of rated voltage @ 70,000 feet
Operating temperature rating: -54° to +125° C





Home | Careers | Search | Contact Us

Navigation House - Canal View Road - Newbury,Berkshire - RG14 5UR United Kingdom
Copyright © 2008 Teledyne Technologies Incorporated. All rights reserved.