|
R75 Cable Assemblies and Receptacles for
Ground Level Applications
|
|
|
Designed for pulse and DC
applications, the R75 series is the vital interconnecting link in many
electronic systems. The use of exclusive design techniques assures corona
resistant performance up to 75 KVDC.
The R75 series achieves its rugged dependability through factory molding and
assembly procedures where cable ends or wire leads become an integral part of
the connector
The molded coaxial connector concept with an air reducing interface seal,
semiconducting rubber corona shields and special mating threads combine to
provide connectors with low corona characteristics and a robustness suitable
for operating under adverse environmental conditions.
Applications (limited to ground level)
|
|
|
|
Applications (limited to ground level)
|
|
|
|
R75 series assemblies are used in:
- Radar systems
- X-ray systems
- Electron beam
equipment
- Accelerators
- Electron microscopes
- Pulse applications
- Pulsed and direct
current high voltage power supplies
|
|
|
Interface cleaning
|
|
|
|
High voltage connectors must always be cleaned prior to
mating. The proper cleaning method is to wipe or spray the interface area
with isopropyl alcohol and immediately blow an inert gas such as dry nitrogen
over the interface area until dry. No other cleaning method should be
attempted.
WARNING: These connectors should NEVER be handled, mated or unmated when
voltage is applied.
|
|
|
Download DataSheet for all R75 Series General
Specifications
|
