|
High Voltage Inline Disconnect Series*
|
|
These In-line Disconnects use Push-on, Pull-off friction mating of the two silicone rubber halves to achieve corona resistant high voltage performance.
The Disconnects are available as single-ended pre-tested assemblies. Kits containing an insulator and a contact are available for field installation. Assembly of these kits requires the use of RTV silicone adhesive.
High Voltage In-line Disconnects are used in ground level applications for:
• Electronic Countermeasure Systems
• Travelling Wave Tube Connections
• Lasers
• High Voltage Power Supplies
• CRT Displays
|
|
|
Interface cleaning
|
|
|
High voltage connectors must always be cleaned prior to mating. The proper cleaning method is to wipe or spray the interface area with isopropyl alcohol and immediately blow an inert gas such as dry nitrogen over the interface area until dry. No other cleaning method should be attempted.
WARNING: These connectors should NEVER be handled, mated or unmated when voltage is applied.
|
|
Download DataSheet for all HVID Series General Specifications
|
|
Home
Products & Services
