Back

Single Pin Contents

Next

Series 610- 5 KVDC Altitude Rated Connectors & Cable Assemblies

DataSheet
	Plugs While Plugs (kits) are available for customer fabricated cable assemblies, Reynolds recommends purchasing cable assemblies because of difficulties customers may experience in assembly and testing. - P/N 167-9363 Series 610 Hex CRES coupling nut - Operating voltage: 5 KVDC up to 70,000 ft. - Operating temperature: -55°C to +125°C - Mating connector: Series 610 receptacles. Note: Will not mate series 600 connectors - Cable: Type “L” FEP shielded cable P/N 167-2896 - Bulk cable Receptacles P/N 167-9364 Front mount, non-sealed connector. Brass body. No Lock wire holes - Operating voltage: 5 KVDC up to 70,000 ft. - Operating temperature: -55°C to +125°C - Mating connectors: Mates all series 610 cable assemblies. - Note: Will not mate series 600 connectors - Ordering Connectors: Specify the Part Number	P/N 167-8920 Series 610 Double-Ended Coaxial Cable Assembly - Operating voltage: 5 KVDC up to 70,000 ft. - Operating temperature: -55°C to +125°C - Test voltage:100% @ 15 KVDC 70,000 ft. simulated. Ambient temp. - Mates all series 610 receptacles - Bulk cable P/N 167-9487Series 610 Single-Ended Coaxial Cable Assembly - Operating voltage: 5 KVDC up to 70,000 ft. - Operating temperature: -55°C to +125°C - Test voltage: 100% @ 15 KVDC 70,000 ft. simulated. Ambient temp. - Mates all series 610 panel connectors - Bulk cable

Series 600 S 5 KVDC “Space Use”

DataSheet
	A series of two receptacles and a cable assembly designed to operate at a minimum vacuum of 10 millitorr to deep space. The connectors have no seals and both plug and receptacle are vented to release any air trapped during pressure reduction associated with launch to deep space. Each receptacle is shipped with an interface seal which can be installed for necessary pre-launch voltage testing. The seal must be removed prior to launch. Customers are strongly urged to discuss any potential usage of these connectors with a Reynolds applications engineer before purchasing or using the series 600 S in any space application.
	- P/N 178-6028 Front panel mount receptacle. Stainless steel vented body - P/N 467-7094 Front mount panel receptacle. Ceramic-to-metal hermetically sealed. Stainless steel vented body with weldable flange. - Leakage Rate: 1 X 10-8 cc/sec. He. (P/N 467-7094 only) - Test seal installation/removal tool: Order P/N 178-8608. - Seal installation/removal procedure: Contact Reynolds Contracts Department and request document R-631 - Operating voltage: 5 KVDC @ minimum 10 millitorr. - Mating connectors: Cable assembly P/N 178-6027 only
	- P/N 178-6027 Series 600 S Coaxial Cable Assembly - Operating voltage: 5 KVDC - Mates series 600 S receptacles, exclusively - Bulk Cable

Back

Next